Nippon The united states’s UHF VHF FM Distribution Amplifier is very best for indoor TV and FM antennas requiring more signal gain. It’s suitable for all HDTV tv broadcasts, in addition to standard and HD FM.
Please Note: This is not going to boost or toughen a bad/weak signal, It’s made to catch up on signal loss from splitters and long cable runs.
Pick a place to your tv cable run where you’ll install the booster. A TV antenna signal booster is installed in-line that may be, the cable will have to connect to the input and output of the booster. In case you are only boosting the signal for one tv, it is logical to install it near the tv. In case you are boosting signal for a couple of televisions, select a place near your antenna line splitter.
Installation Note: TV amplifiers that have a power supply (such as this model) will have to be installed indoors, or in a location in an effort to not be subject to any moisture. A booster will have to be installed as close as imaginable to the antenna, and before any coax cable splitters that can be used.
NOTE ABOUT USE and POTENTIAL FOR STATION LOSS: A signal amplifier/booster will only toughen a signal that may be already present. This booster will have to work for any channel that may be utilized by off-air TV stations. There are all the time situations where an amplifier does not lend a hand. If the station is particularly weak, but there are other very strong channels nearby, even radio stations, such radio station signals would possibly block out other TV stations. This amplifier amplifies the whole thing throughout the point where a local strong station could create interference that covers up the weak station you are trying to receive.
If the station is particularly weak, and/or there’s a long length of cable, or splitters to other TV’s between the antenna and this amplifier, certain channels can be lost.
UHF VHF FM Distribution Amplifier for TV/VCR
36dB Gain Keep an eye on Signal Booster
FM Trap / On-Off Indicator Light
1 Input / 1 Output