Tips 1. AT-601B should be powered for serve as. It may be powered by means of USB cable by connecting to any USB-port supporting 5V output. A USB AC/DC power adapter is included in package. 2. Re-scan the channels after every switching of the Smart pass Amplifier. 3. Scan channels per 30 days to search out all to be had channels including newly added or changed. 4. Don’t place or hide the Smart pass Amplifier in/in the back of any metallic objects. 5. Keep the antenna away from any high power consumption devices to keep away from interference. Product Information Power Supply: DC 5V/50mA Size: 2. 90×1. 26×0. 70in TO TV: 3ft Extension Coaxial Cable Attached with F-male Connector TO Antenna: 0. 3ft Extension Coaxial Cable Attached with F-female Connector Frequency Range: 87. 5-700MHz Receiving Range: FM/VHF/UHF Gain: 16dB Max Impedance: 75Ω Noise figure: ≤2dB Power Supply: DC5V/50mA What’s within the box 1* AT-601B Smart pass Amplifier and Power Supply Kits 1* 5V USB AC/DC Power Adapter 1* 5ft USB Cable 1* Instruction/User Manual
【Delivers the proper range for YOU】ANTOP exclusive technology- SMARTPASS amplifier allows easier adjust the balance between short and long range reception. Switched on to spice up weak signal reception and switched off to keep away from overload signal reception. You should not have to hesitate any further on deciding between a short range and long range antenna!
【Amplified clear circuit technology】 deliver more range and crystal clear picture, reduce signal dropout and pixilation. The amplifier/ booster can beef up the signals weakened by the obstructions between you and the towers. But can’t add signals. Works with any non-amplified/passive TV antenna and can not work with antennas which already are amplified.
【Shields against INERFERENCE】Build in 4G LTE Filter, blocks 3G and 4G wireless signals for clear smooth pictures and stable Channel reception. Bringing you a no-noise and no-flash TV viewing experience and into an actual circle of relatives paradise.
【EASY INSTALLATION IN ONE MINUTES】3ft and 0. 3ft extension coaxial cables are attached at either end for simple connection. Smart pass amplifier should be powered to serve as. Unit can also be powered by means of the included USB cable by connecting to any USB power adapter supporting 5V output on USB-port.
【NOTE】We do NOT recommend to make use of this amplifier / booster if your home could be very with reference to the printed tower and the signal is already very strong. A booster will cause self-oscillate and you can get fewer signals than without. Antenna effectiveness may be influenced by its distance from the signal origination point, station signal strength level, building construction, antenna positioning, reflections from nearby structures and any power consumption sources.