This commercial-grade RF CATV distribution amplifier helps Spice up the RF TV signal for analog/digital cable TV, CCTV, SMATV, antenna or all other RF modulated TV system with amplification as much as 50 dB gain.
This high-gain TV signal booster can be utilized for full range of TV bands for both UHF/VHF and CATV systems when you’ve got long cable TV runs and more than one splitters used within the setup.
It provides clean, crisp video for large homes or place of business buildings with long cable runs and plenty of TV outlets where amplifier cascading is needed.
Featured with adjustable attenuation to scale back overdriving and adjustable tilt compensation to permit large systems to be properly balanced.
High Gain 50dB Boost
This unit is featured with high 50 dB gain for RF input signals to compensate the RF TV signal loss and attenuation after long cable transmission.
Users can easily extend the cable TV signal for every other 2100FT or 650m if RF TV source signals have fair 70 to 75dB strength first of all.
So more TVs can also be added in large place of business building or home place of dwelling.
Also served as a super solution for fixing the issues of noise, snowy picture, interference and weakness after distribution for CATV, Digital TV systems and CCTV systems.
Easy Gain Regulate From 0~ -18dB
The variable gain dial in this amplifier provides an adjustable attenuation Regulate for reducing the potential of over driving.
Correct gain level can greatly support the image quality with minimum noise.
Easy Tilt Regulate From 0~ -16dB
When installer has a big RF TV system to run or multi-transmission by one coaxial cable, this Slope Regulate serve as helps installers balance all cable TV signals to be transmitted at same output amplitude for optimal installation.
-20dB Input/Output Testing Port
A testing port with -20dB input/output is provided for simple trouble shooting.
Professional-grade cable TV and antenna signal amplifier with high 50dB output level. Supports TV coax cable signal from cable outlet, cable TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation.
High-power amplification to atone for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain Regulate and tilt Regulate permits for simple system balancing.
Solution in solving the issues of noise, interference and weakness after distribution. Spice up RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength first of all. Boosts the prevailing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution.
Adjustable gain/attenuation to scale back overdriving. Adjustable tilt compensation to permit large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels.
Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for simple trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides very good heat dissipation and long durability.