The SKY38323 is designed to amplify or boost an off air TV signal. The unit has variable gain by way of a keep watch over at the front panel (as much as 25dB of gain VHF frequencies 21db for UHF frequencies). The product has a metal case for durability and connections are made the use of standard F type connectors for the in/out ports. Accommodates a built in power supply that may be designed to hook up with a regular 120 volt/ 60hz AC outlet. An on/off status light is visible at the front panel.
- Enjoy the keep watch over of variable gain (with as much as 25dB of gain) in VHF / UHF / FM bands.
- Low operation interference and minimal noise production & adjustment gain control
- Bandwidth: 47-1000MHz || Maximum Input: VHF 40dB MV / UHF 20dB MV || Gain: VHF 25dB / UHF 21dB
- Heavy-duty metal housing with built-in mounting screw holes & power indicator light
Please note: When the use of this product a proper signal path will have to be established.
System With No Pre-Amplifier:
The SKY38323 will have to be installed right away before any distribution splitter that supplies signals in your TV’s. The correct signal path is: Antenna> coax> amplifier> splitter> TV’s.
System With Pre-Amplifier:
The SKY38323 will have to be installed after the power inserter that supplies voltage in your preamp. Failure to do that as it should be will block the DC voltage from getting to the preamp and you’ll haven’t any picture. Also, you risk damaging the SKY38323. The correct signal path is : Antenna> preamp> coax> power inserter> amplifier> splitter> TV’s.
You will need to that your antenna is pointed as it should be, all fittings are properly installed and that you’ve got used The correct coax cable. RG-6 is the one cable we suggest for this purpose.
Use this distribution amp to support signal reception from antenna to TV
This product will have to be installed by a qualified technician to verify proper performance and suitability.
This amplifier will increase or amplify a TV signal, then again it can not create or produce a TV signal.
This amplifier isn’t designed to work with CABLE TV. It is sole purpose is to amplify TV signals ranging from 47 to 1000MHz.
For those who don’t seem to be experienced with the distribution of a TV signal you will have to not purchase this item.